Mysest56 
March 13, 2018
Whether you’re painting as it’s time to freshen things up or to protect the colour error of a prior occupant, a end needs lots of prep work as well as the proper resources. This can be especially true when painting trim and molding, which are created to stand out from your partitions and include a finished appearance to the area. It is tempting to grab a brush and dive in, but appropriate planning is essential to creating aged molding seem new, clean and appealing to prospective customers.
What kind of paint was used the last time. Latex paint used over oil-based paint will peel back away, and that means you you must know know that which you’re working with. To find out, use a rag to rub some de-natured alcohol on the paint. Latex paint can come off on the rag but oil-based paint WOn’t. In the event that you are going to be painting over oil-based paint, you have to use another oil- prime the area before painting using a product or based paint especially developed with this purpose.
Wash the molding using a rag as well as a moderate household cleanser. Your paint WOn’t adhere to oil, grease or dirt which will be in your molding.
Use a scraper to remove any flaking or peeling paint in the molding.
Sand any places on the molding with 60-grit sandpaper, then sand all the molding with 120-grit sand-paper. Use the 120-grit paper after you paint, so that they do not stand out to feather out the edges around any places. Use a store vacuum to eliminate paint chips and sanding dirt in the molding.
Mask off ceiling, the partitions, and floors with painter’s tape. For those who have a constant hand and nerves of metal it’s possible for you to skip this step, but painters will discover that it’s easier to get clear lines and prevent mishaps with tape.
By filling any gaps involving the wall as well as the molding using an obvious caulk avoid ugly seams. Nail holes and imperfections in the molding it self should be stuffed with wood putty.
Pour some paint in to a tiny container till it’s about 2″ deep. This container will serve as your âcut bucket” and can help you utilize the proper amount of paint for edging. To load paint on your brush, dip it in to the cut bucket and gently faucet the flat aspect of the brush contrary to the facet of the bucket.
Use the paint to some 2- or 3-foot area by putting the tip of the brush from the fringe of of the molding, pushing therefore the bristles fan-out. Drag the brush efficiently throughout the edge of the molding in a straightline where molding and the wall fulfill to produce a clear edge. Repeat this procedure on the top and bottom edges of the molding.
Paint the center area of of the molding utilizing long, even before relocating to another section of molding brush-strokes after painting equally edges. Painting your molding will help remove brush strokes and certainly will create a result that is better than doing every one of the edging a T once and filling in the centre of the trim.